Steel Shots
Steel shot is a spherical metallic abrasive medium formed by the atomization of molten steel. Steel Shots are primarily used in metalworking industries such as ferrous and non-ferrous foundries, steel mills, forge shops, and metal fabricators for sand removal and to improve metal surface preparation, among others, because the process is non-hazardous and thus produces the least amount of dust. At various stages of metal production, blast cleaning with steel abrasive media is an important activity. Steel shot comes in a variety of shapes and sizes and produces exceptional effects on metal surfaces. Because of its resilience and excellent endurance, it creates the most cost-effective abrasive media with a recycling capacity of more than 30 times. A bigger steel shot scrubs a rougher surface vigorously.
Steel abrasives come in the round (shot) or angular (grit) form. Steel shot media is produced by the atomization of molten steel, followed by a series of thermal and mechanical treatments in order to give the product final characteristics.
Both a wheel blasting machine and an air powdered system are utilized to accelerate steel shot on the surface. Steel shot produces the least dust since their manufacturing method is gentle. Steel shots are utilized to clean heavy metal components such as engine turbine blades, crankshafts, and heavy-duty springs. In comparison to high carbon steel shots, low carbon steel shot has a lower hardness. Because of its microstructure, it can withstand impact before scattering/dissipating and turning into tiny powdered dust. Steel shot in India is even employed in flash descaling. Because low carbon steel shot is softer in nature and cannot be crushed into grits, it is utilized less. Steel shots are created from scrap steel.
Steel Shot Blast Media
Because of its limited friability, steel shot blast media is exceptionally durable (an abrasive media can have the same hardness but a different friability, similar to that of durability). The impact of blasting actually tempers the steel shots so that their hardness increases over time, allowing the blasting media to provide consistency, repeating the same performance for thousands of cycles. It has an incredibly low breakdown rate and produces no dust. Steel Shot is used in shot blasting / sand blasting machine for strong scouring and producing highly bright finishing surfaces due to its high impact energy and fast cleaning rates. These steel bullets significantly reduce the cost of blasting machines many times.
Round Steel Shots
Round steel shot blast media is a spherical product of hyper eutectoid steel (C 0,85%) that has been quenched and tempered. Perfectly controlled heat treatments give it maximum resilience and fatigue resistance. This type of steel shot in India is used in applications requiring mass and maximum bounce, as well as for shot peening.
Steel Shots Size
Ambica Enterprises is the best steel shots manufacturer in India. we are the Supplier of all types of steel shots size & grades. The steel shots size is determined by the diameter of the steel balls, which can range from 0.8 mm to 3.5 mm, depending on the intended use.
| Steel Shots |
Steel Shots Size |
| S70 |
0.18 - 0.35 |
| S110 |
0.30 - 0.50 |
| S170 |
0.42 - 0.71 |
| S230 |
0.59 - 0.84 |
| S280 |
0.71 - 1.00 |
| S330 |
0.84 - 1.19 |
| S390 |
1.00 - 1.41 |
| S460 |
1.19 - 1.68 |
| S550 |
1.41 - 2.00 |
| S780 |
2.00 - 2.80 |
| S930 |
2.36 - 3.35 |
Steel Shots Features
- Steel Shot medium offers an excellent result on metal surfaces.
- Steel shot in India is extremely strong in India.
- It is fantastic to be able to recycle and save money.
- This substance is used in both wheel blasting techniques and air-powered blasting equipment.
- Surface pollution is removed, leaving a fully clean, smooth surface.
Steel Shots Uses
Steel shots are small spherical particles made of hardened steel and are used in a wide range of industrial applications. Here are some of the most common uses of steel shots:
-
Shot Blasting: Steel shots are commonly used in shot blasting, which is a surface preparation process that involves blasting steel shots at high velocity onto a surface to clean, polish, or strengthen it.
-
Peening: Steel shot in India is used in shot peening, which is a process of bombarding a metal surface with steel shots to create compressive stresses that improve the material's fatigue strength.
-
Deburring: Steel shot media is used to remove burrs or sharp edges from metal surfaces.
-
Cleaning and Descaling: Steel shot blast media is used to clean and descale metal surfaces by removing rust, scale, and other impurities.
-
Tumbling: Steel shots are used in tumbling processes to polish and smooth metal surfaces.
-
Shotcrete: Steel shot media are added to the concrete mix to enhance its strength, durability, and resistance to abrasion and impact.
-
Bearings and Valves: Steel shot blast media is used as the raw material for the manufacture of bearings, ball bearings, and valves.
-
Additive Manufacturing: Steel shot in India is used as feedstock material in additive manufacturing, such as in the process of binder jetting.
Steel shot price depends on the grades, sizes, quality, hardness, and quantity of steel shot in India. The steel shot price range is Rs 65 /kg - 100 /kg. Ambica Enterprises steel shot price is low compared to others and with the best quality.
